Qualification:ME, DPM, Ph.D., “Six Sigma Green Belt”, Certification, and
Diploma in Software Capability Maturity Model
Area of Specialization: Operations Management
Research experience: Teaching: 33 years, Research: 25 years
Subjects Teaching: Operations Management, Quantitative Methods, Business Communication, Quality Management, Supply Chain Management, Technology Management and Innovation
Workshop /Conference / Seminar/ FDP attended : Workshop:8, Conference: Seminar: FDP:6
Workshop /Conference / Seminar/ FDP Conducted : Workshop:8, Conference: 2, Seminar/FDP:10

Sponsored Project: 2
Books Published:  4

Publication of Research Paper: (details)
International Journals: 17
National Journals: 41
International Conferences: 14
National Conferences: 37
Recognized Ph.D Guide:
• University of Mysore – One candidate awarded the Ph.D. and one under guidance
• Visveswaraya Technological University – Two candidates awarded the Ph.D.
• Universidad Azteca, Mexico City Azteca, Mexico. One candidate awarded the Ph.D.

Research  Articles Publications:      (National Journals and International Journals )

1. Jagadeesh, R. (2019). Ford and Recalls – are they inseparable?, Case Study Volume 6, SDM IMD, India.
2. Jagadeesh, R. (2019). Selection and ranking of Six Sigma projects –A comparative assessment of methods. Contemporary Research in Management, Volume 8, SDM IMD, India, ISBN 978-93-83302-37-6, pp 169-206
3. Jagadeesh, R. (2018). Quality and Innovation” or “Guts and Glory” – the success story of Micromax. Case Study Volume 6, SDM IMD, India., ISBN 978-93-83302-36-9, pp 125-148.
4. Jagadeesh, R.(2018). Demand forecasting and analysis in a declining market with emphasis on strategic operations management, Contemporary Research in Management, Volume 7, pp 15 – 21, SDM IMD, India, ISBN 978-93-83302-23-9
5. Jagadeesh, R. (2018). A cold call on the cold supply chain in India, Case Study Volume 5, ISBN: 978 93 83302-22-2, 1-22 SDM IMD, India.
6. Jagadeesh, R.(2017). Spiritual obsession and its influence on behavioral aspects of students, Global Journal of Addiction & Rehabilitation Medicine, 4 (5), 01-02, ISSN: 2573-2447, DOI: 10.19080/GJARM.2017.04.555648.
7. Jagadeesh, R.. (2017). Performance benchmarking of electricity power stations using Data Envelopment Analysis, Contemporary Research in Management, Volume 6, pp 265 – 301, SDM IMD, India, ISBN 978-93-83302-23-9.
8. Jagadeesh, R. (2016). Six sigma benchmarking of process capability analysis and mapping of process parameters, Journal of Operations and Supply Chain Management, Vol. 9, No 2, pp 60 -71
9. Jagadeesh, R.. (2016). Airbags are not just a matter of air- Lessons from Takata and Toyota Recall, Case Study Volume 4, ISBN: 978 93 83302-22-2, 1-22 SDM IMD, India.
10. Jagadeesh, R. . (2016). Optimizing the capacity addition in a component manufacturing industry – An empirical investigation, Contemporary Research in Management, ISBN: 978-93-83302-15-4, Vol.5, 333-365, SDM IMD, India.
11. Jagadeesh, R. (2016). Application of 7 QC tools to investigate the rejection of lathe beds – Case study of a machine tool manufacturing company, Case Study Volume III, ISBN: 978 93 83302-05-5, 19-33 SDM IMD, India
12. Jagadeesh, R. (2015). Performance Assessment of Global Supply Chains and Moving Towards Optimization of Efforts and Challenges, International Journal of Recent Advances in Organizational Behaviour and Decision Sciences, An Online International Research Journal, 1 (3), pp 400 – 416, ISSN 2311-3197
13. Jagadeesh, R. (2015). Internalizing the Corporate Social Responsibility through strategic operations management, Arabian Journal of Business and Management Review, 5 (4), pp 1-5. doi: 10.4172/2223-5833.1000131, E-ISSN: 2223-5833
14. Jagadeesh, R. (2015). Responsible Operations Through Materials’ Conservation – An Overview of Techniques And Trends, International Journal of Information, Business and Management, Vol. 7, No. 2, 85-96.
15. Jagadeesh, R. (2015). Enhancing the After Sales Service Quality Using the Six Sigma Approach – A Case Sudy, Contemporary Research in Management, ISBN: 978-81-922146-8-9, Vol. 4, SDM IMD, India.
16. Jagadeesh, R. (2014). Are Indian Car Buyers not serious about safety? A case Study of Maruti Suzuki India Limited, Case Study Volume III, ISBN: 978 93 83302-05-5, SDM IMD, India, 19-33.
17. Jagadeesh, R.(2014). Quality Leaders – Learning From The Deming Prize Winners In India, International Journal for Quality Research, Volume 8, No. 3, 431-446.
18. Jagadeesh, R. (2014). Training And Learning About Quality Management By “LAQTAAQ” – An Innovative Method accepted for publication International Journal Of Research In Organizational Behavior And Human Resource Management, December 2014
19. Jagadeesh, R. (2014). Process Capability Assessment When Multiple Characteristics Exist – A Composite Approach Using Six Sigma Metrics, Contemporary research in management, ISBN 978-81-922146-8-9, Vol. 3, pp. 207-234.
20. Jagadeesh, R. (2014). Emphasis on Human Resource Management in Quality Improvement – A case study of Quality Awards’ Criteria, International Journal of Economics, Commerce and Management, Volume 2, Issue 1, pp. 1 – 12
21. Jagadeesh, R.. (2013). How to improve the supply chain management competency to meet the global challenges, Contemporary research in management, ISBN 978-81-922146-7-2, Vol. 2, pp. 61-85.
22. Jagadeesh Rajashekharaiah and Gershon, Mark. (2013) “From Deming Cycle to DMAIC’, International Journal of Productivity and Quality Management, Volume 11, Issue 4, pp 475-489.
23. Jagadeesh, R.(2012). Quality strategy formulation and development using organizational perspective, Contemporary research in management, ISBN 978-81-922146-1-0, Vol. 1, pp. 33 – 48.
24. Jagadeesh Rajashekharaiah. (2012), CSR, Clean and Green Operations – Suppliers’ Code of Conduct Revisited”, Journal of Supply Chain Management Systems, Volume 1, Issue 4, pp 30 – 36.
25. Mark Gershon, Jagadeesh Rajashekharaiah, (2011) Double LEAN Six Sigma – A Structure for Applying Lean Six Sigma, Journal of Applied Business and Economics, Volume 12, Issue 6, pp. 26 – 31.
26. Jagadeesh, R. (2011). “A Perspective on Retail logistics – the backbone of retail revolution in India”, ITM n Ach, Volume 5, No. 2, pp 57-68.
27. Jagadeesh, R. and Gershon, Mark. (2010) “Performance Assessment of Supply Chains – Comparison Across Countries: A Case Study of USA and India” International Journal of Information Systems and Supply Chain Management, Volume 3, Issue 3, pp 66 – 79.
28. Jagadeesh, R. (2009) “SCM in Practice – A Case Study in the Food Retail Sector”, Materials Management Review, Volume 6, Issue 2, pp 18 -20.
29. Jagadeesh, R. and Subrahmanya Bhat, K.(2009) “An Empirical Study of Barriers to TQM implementation in Indian Industries”, The TQM Journal, Volume 21,No. 3, pp 261-273.
30. Jagadeesh, R. and H. Ramakrishna  (2008) “Amalgamating TQM and Six Sigma: Fostering Rejuvenating Prospect”, Journal of Contemporary Research in  Management, Voumel.3 , Number 8 , pp.41-46.
31. Jagadeesh, R. (2008) “Impact of Product Recalls on Logistics” Materials Management Review, Volume 5, Issue 1, pp 38 -40.
32. Jagadeesh, R. and Ramakrishna, H.(2008) “Enhancing the Customers’ Service by Better Spares Management Using the Six Sigma Approach – A Case Study” Materials Management Review, Volume.4 , Issue10 , pp 10-13.
33. Jagadeesh, R. and Ramakrishna, H. (2008) “Rejuvenate Six sigma and Lean: An Inquisitive Approach”, PES Business Review, Issue 1, Volume 3, January 2008.
34. Jagadeesh, R. (2007) “Benchmarking To Improve Supply Chain Performance” Materials Management Review, Issue 2, Volume 4, pp 8 -13.
35. Jagadeesh, R., Subrahmanya Bhat, K (2006) “ISO 9000 Implementation in Indian Industries: A Study of its Reasons and Benefits”, ICFAI Journal of Operations Management, Volume 5, Issue 4, pp 53 – 64, November, 2006.
36. Jagadeesh, R. (2006) “Exploration into the Quality Septet”, The TQM Magazine, Volume 18, Issue 5, pp 433 – 439, September 2006
37. Jagadeesh, R. (2006) “Supply Chain Performance Measures – Trends and Issues”, Materials Management Review, Volume 2, Issue 9, pp 18 – 20, July 2006.
38. Jagadeesh, R. (2006) “Developing Quality Strategy Using A Composite Approach” i-Manager’s Journal of Management, June 2006.
39. Jagadeesh, R. and Dattakumar, R. (2003) “Benchmarking – A Literature Review”, International Journal of Benchmarking, MCB University Press, UK, No. 3, Vol. 10, 2003, pp 176 – 209.
40. Jagadeesh, R. (2001) “Towards Improving Quality of Technical Education – Deming Wheel Revisited”, Indian Journal of Technical Education, Vol. 24, No. 4, pp 14 –17, October – December.
41. Jagadeesh, R. and Dattakumar, R. (2001) “Strategic Application of Information Technology for Successful Benchmarking”, Journal of Institute of Management Studies – 8M, Vol.6, No. 4, October – December, pp 24-28.
42. Jagadeesh, R. (2000) “Improvement of Quality of Higher Education in Engineering Sciences with Emphasis on International Aspects”, Indian Journal of Technical Education, Vol. 23, No. 3, pp 43 -47. July – September.
43. Jagadeesh, R. (2000) “Assuring Quality in Management Education – The Indian Context”, Journal of Quality Assurance in Education, MCB University Press, UK, Vol.8, No.3, pp 110 – 119.
44. Jagadeesh, R. (2000) “Balancing the Curriculum to Improve Quality”, Indian Journal of Technical Education, Vol. 23, No. 2, pp 73 -76. April-June.
45. Jagadeesh, R. (1999) “Total Quality Management in India – Perspective and Analysis”, The TQM Magazine,  MCB University Press, UK, Vol. 11, No. 5,  September-October,  pp 321-327.
46. Jagadeesh, R., (1999) “Corporate Success Through Strategic Application of Information Technology”, Journal of Institute of Management Studies – 8M, July-September, pp 45-48.
47. Jagadeesh, R. and Subash Babu. A.(1999) “Process Capability Assessment of Correlated Data Using Time Series Analysis”, International Journal of Management and Systems, Vol. 15, No. 2, May – August,  pp 147-174.
48. Jagadeesh, R. (1999), “Total Quality in Industry‑Institute Partnership Through Deming’s 14 Points”, Indian Journal of Technical Education, Vol. 22, No. 2, April‑June,  pp 15-18.
49. Jagadeesh, R. (1999), “Effect of ISO 9000 Standards on Production/Operations Management”, Quality Focus, Vol. 4, No. 1, January‑March, pp 1-4.
50. Jagadeesh, R. (1999), “Fresh Engineering Graduates ‑ Bridging the Gap Between Employers’ Expectations and Reality”, Journal of Engineering Education, Vol.12, No.3, January.
51. Jagadeesh, R. And Shankar Prasad, K. (1998), “Inventory Control of Custom Made Products: A Case Study”, Industrial Engineering Journal, Vol.25, No.5, May, pp 19-25.
52. Jagadeesh, R. (1998), “Total Quality Management Through Performance Appraisal”, Journal of Institute of Management Studies ‑ 8M, January ‑ March, pp 19-22.
53. Jagadeesh, R. (1998), “Performance Appraisal and Total Quality Management”, Indian Journal of Training and Development, Vol.28, No.1, Jan‑March, pp 39-47.
54. Jagadeesh, R. and Dattakumar. R. (1998), “Quality Assurance Through Benchmarking: Identifying What to Benchmark”, Proceedings of the National Conference on Industrial Engineering, Tirupati, India, January.
55. Jagadeesh, R. and Chigateri, A.V. (1997), “Development of Computerised Maintenance Manual for a Steel Plant ‑ A Case Study”, Journal of Maintenance, October ‑December, pp 13-17.
56. Jagadeesh, R. (1997), “A Model Curriculum in Quality Engineering and Management Using Industry Institute Partnership “, Indian Journal of Technical Education, Vol.20, No.4, October‑December, pp 12-15.
57. Jagadeesh, R. (1995), “Engineering Educator as Researcher ‑ Some Issues”, Indian Journal of Technical Education, Vol.18, No.2, April‑June, pp 53-54.
58. Jagadeesh, R. and Subash Babu, A. (1994), “Process Capability with Tool Wear: An Investigative Study”, International Journal of Quality & Reliability, MCB University Press, UK, Vol.11, No.(2), pp 51‑62.

Publications By Dr. R. Jagadeesh In Conferences & Seminars:(details)
(In reverse chronological order)

1. Jagadeesh, R and Deshpande, S. (2019). A Comprehensive Study and Classification of Barriers That impede Green Supply Chain Management, International Conference on Building Business Uniqueness Towards Industry 4.0, Bangalore, India, 14-15 March 2019.
2. Jagadeesh, R. (2018). A model curriculum in operations management using a blended pedagogy, National Conference on Future of Learning, IIM Bangalore, India, 15-17 Jan 2018.
3. Jagadeesh Rajashekharaiah (2015). Performance Assessment and  Optimization of  Global  Supply  Chains”, International Conference on Global Business, Economics, Finance and Social Sciences (GB15_ Thai Conference), Bagkok, February 20-22.
4. Jagadeesh Rajashekharaiah (2014). Benchmarking India’s Innovation Capabilities Using the Global Innovation Index, Proceeding of the International Conference on Technology and Business Management, ICTBM 2014, Dubai, March 24-26, pp171-176.
5. Jagadeesh, R. (2012). “Globalization of Management Education – Trends and Challenges”, IX Convention of Federation of Teachers’ Councils of Commerce and Management in Karnataka, Mysore, February 2012
6. S B Mallur, N L Hiregouder, A H Sequeira, R. (2011). “Obstacles to TQM Implementation in SMMEs of North Karnataka Region: Empirical Findings, International Conference on Emerging Trends in Engineering (ICETE – 2011) Nitte, India, May 2011.
7. Jagadeesh, R. (2011), “Impact of Reverse Logistics on Supply Chain Profitability – Global Study of Selective Cases”, International Conference titled “Changing Perspectives of Management”, Kathmandu, Nepal, 10 – 12 March 2011.
8. Jagadeesh, R. (2010). “Impact of Globalization On Management Education With A Perspective On Operations Management”, National Conference on Impact of Globalization on Management Education – Curriculum to Careers, Bangalore, India, 11 December 2010.
9. Jagadeesh, R (2009) “Enhancing Service Quality Through Lean Six Sigma – Modeling and Applications” Conference on “Service Strategies for Global Leadership”, Mysore, 23-24 July 2009.
10. Jagadeesh, R (2008) “Curriculum Design And Pedagogy In Technical Education To Satisfy The Customers’ Needs”, “Recent Trends in Technical Education”. Proceedings of the ISTE Annual Convention, Bhuvaneshwar, India, December.
11. Jagadeesh, R. and Ramakrishna, H. (2008) “Applying Six Sigma in the Service Industry: A Review and a Case Study”, All India National Conference on “Changing Role Of Service Sector – Global Perspective” (NCOSS’08) March 7th & 8th, 2008,   Kalasalingam University, Anand Nagar, Tamilnadu
12. Jagadeesh, R. and Ramakrishna, H. (2007) “Six Sigma Analysis of Group Attrition in Software Company – A Case Study”, International Conference on Advances in Manufacturing Engineering (ICAME-2007), Manipal Institute of Technology, Manipal, India, October 24-26, 2007.
13. Jagadeesh, R. and Ramakrishna, H (2007) “Six Sigma Quality Strategies for Elimination of Repetitive Snags in the Manufacture of Dumpers”, Proceeding of the International Conference on Total Engineering, Analysis & Manufacturing Technologies (TEAM TECH-2007), Indian Institute of Science, Bangalore, India, October 4-6, 2007, p. 130.
14. Jagadeesh, R. (2007) “Overcoming the Barriers in implementing TQM and sustaining the success through Continuous Quality Improvement – Deming’s 14 Points Revisited”, International Conference on Global Business Strategy in Competitive Environment, 21- 22 September 2007, Chennai, India.
15. Jagadeesh, R. and Ramakrishna, H. (2007) “Comparison Of Traditional Quality Management Systems With Six Sigma”, Proceedings of the Global Conference on Production and Industrial Engineering, March 22-24, 2007, Jalandhar, India.
16. Jagadeesh, R. (2007) “Competitiveness Through Knowledge Based Entrepreneurship – Role of Institutions of Higher Learning”, International Conference on Emerging Competitiveness Paradigms, Goa, India, January, 2007.
17. Jagadeesh, R. (2006) “Supplier Evaluation Using Process Capability Analysis To Improve Supply Chain Performance”, 3rd International  Conference on Quality, Reliability And Infocom Technology (Trends And Future Directions), Delhi, India, December 2006.
18. Jagadeesh, R. and Ramakrishna, H. (2006) “Six Sigma in Education – An Explanatory Study”, Proceedings of the National Conference on Advances in Mechanical Engineering (TQM-2006), NMAMIT, Nitte, March 2-3
19. Jagadeesh, R. and Ramakrishna, H. (2006) “Six Sigma in Manufacturing and Non-Manufacturing Process” Proceedings of the National Conference on Advances in Mechanical Engineering at Jamia Milia Islamia, (University College) New Delhi, January 21-22, 2006.
20. Jagadeesh, R. and Ramakrishna, H. (2005) “Key Factors for the successful implementation of Six Sigma Projects in Organisations”, Proceedings of National Conference on Recent Advances in Mechanical Engineering, P. A. College of Engineering, Mangalore, December 1-3 , 2005.
21. Jagadeesh, R. and Ramakrishna, H. (2005) “Six Sigma Quality Strategy- An Overview” National Conference on Advances in Mechanical Engineering, Hyderabad, May 13-14, 2005, pp. 25 – 28.
22. Jagadeesh, R. (2004) “Benchmarking Higher Education – An Overview”, Proceedings of National Conference on Integration of Strategies For Effective Quality Management In Technical Education, Nitte, India, December 2-3, 2004, pp 129 – 134.
23. Jagadeesh, R., Subrahmanya Bhat, K., and Srinivasa Pai, P. (2004) “From ISO 9000 to TQM – A Journey Towards Excellence”, Proceedings of National Conference on Challenges in Achieving Global Quality, Madurai, India, May 24-25, 2004, pp 121 – 126.
24. Jagadeesh, R. and Dattakumar, R. (2004) “Application of Benchmarking In Manufacturing Sector”, Proceedings of National Conference on Challenges in Achieving Global Quality, Madurai, India, May 24-25, 2004, pp 195 – 201.
25. Jagadeesh, R., Subrahmanya Bhat, K., and Srinivasa Pai, P. (2004) “TQM Implementation Approaches in Industries – Some Issues”, Proceedings of National Conference on Advances in Mechanical Engineering, Shimoga, India, 2004, pp 11 – 20.
26. Jagadeesh, R. and Dattakumar, R. (2003) “Benchmarking Engineering Education System Using Quality Award Criteria”, Proceedings of National Conference on Quality Management, Coimbatore, January.
27. Jagadeesh, R. (2003) “What to Teach Under TQM ?”, Proceedings of National Conference on Quality Management, Coimbatore, January.
28. Jagadeesh, R. and Dattakumar, R. (2002) “Benchmarking Quality Initiatives in Engineering Colleges”, Proceedings of National Seminar on Role of Technical Education in Meeting Challenges of Globalization”, Davanagere, India, November, pp 116 – 123.
29. Jagadeesh, R. (2002) “Meeting the Challenges of Globalization Through Continuous Quality Improvement of Technical Education”. Proceedings of National Seminar on Role of Technical Education in Meeting Challenges of Globalization”, Davanagere, India, November, pp 19 – 26
30. Jagadeesh, R. (2002) “A Perspective on Reliability, Availability, and Maintainability, (RAM), Proceedings of the National Conference on Recent Trends in Condition Monitoring of Machines, NMAM Institute of Technology, Nitte, India, March.
31. Jagadeesh, R. (2001) “Online Control Approach to Six Sigma Quality – An Empirical Investigation”, Proceedings of National Conference on Advanced Trends in Mechanical Engineering Research and Development, Anantapur, Andhra Pradesh, India, October, pp 102 – 106
32. Jagadeesh, R. and Dattakumar, R. (2000) “Benchmarking Management Education – The Indian Context, Proceedings of the International Conference on Quality, Reliability and Information Technology, New Delhi, December.
33. Jagadeesh, R. and Dattakumar, R. (2000) “Benchmarking for Quality Improvement in IT and Non-IT Companies – A Comparative Study”, National conference on Quality and Reliability Management, Vaniyambadi, Tamil Nadu, September.
34. Jagadeesh, R. (2000), “Maintenance Management Information Systems”, Proceedings of AICTE Short Term Course on Maintenance of Machinery, Mysore, India, March.
35. Jagadeesh, R. (2000) “From Total Quality Management to Total Productive Maintenance”, Proceedings of AICTE Short Term Course on Maintenance of Machinery, Mysore, India. March.
36. Jagadeesh, R., (2000) “A Framework for Deploying Information Technology to Manage The Challenges of Change”, Proceedings of III Annual 8M Management Paper Contest, New Delhi,  India, February.
37. Jagadeesh, R. (1997), “Achieving Quality Education Through Benchmarking”, International Conference on Quality Engineering & Management, Coimbatore, India, August.
38. Jagadeesh, R. and Subash Babu, A. (1997), “An Integrated Approach to Tolerance Analysis Through Process Capability Studies” International Conference on Quality Engineering & Management, Coimbatore, India, August.
39. Jagadeesh, and R. Dattakumar. R. (1997), “Role of Benchmarking in TQM”, Proceedings of National Conference on Quality & Reliability, Mysore, India, June.
40. R. (1997), “A Simulation Based Approach to Process Capability Studies” Proceedings of National Conference on Quality & Reliability, Mysore, India, June.
41. R. (1997), “Process Capability Analysis in the Presence of Non‑normality”, Proceedings of National Conference on Quality & Reliability, Mysore, India, June.
42. Jagadeesh, R (1996). “Quality Improvement through Benchmarking in an Engineering Education Institute’, Proceedings of UnIG’96, International Conference on Technology Management: University, Industry, Government Collaboration, June, Istanbul, Turkey.
43. Jagadeesh, R. and Subash Babu, A. (1995), “Process Capability Measure for Multicharacteristic Situations”, Proceedings of International Conference on Excellence in Manufacturing, Bangalore, India, August, pp 164-174.
44. Jagadeesh, R. (1995), “Quality Management in Service Industries”, Proceedings of All India Seminar on Advances in Industrial Engineering & Productivity Improvement Techniques, Allahabad, India, February.
45. Jagadeesh, R. (1995), “Need Based Training Material for Continuing Engineering Education ‑ A Case Study in SPC”, Proceedings of the National Conference on Role of Continuing Engineering Education in Industrial Restructuring, Roorkee, India, February.
46. Jagadeesh, R. (1993), “Total Quality Management in Engineering Education”, Proceedings of the 35th Annual Convention of Indian Institution of Industrial Engineering, Hyderabad, India, October, pp 258-264.
47. Jagadeesh, R. and Subash Babu, A. (1993), “Some New Directions in Process Capability Studies”, Proceedings of the 8th ISME Conference on Mechanical Engineering, New Delhi, March.
48. Jagadeesh, R. and Subash Babu, A. (1992), “A New System for Process Evaluation and Control Using Multiple Measures: An Approach to TQM”, Presented in the 15th AIMTDR Conference, Coimbatore, India, December.
49. Jagadeesh, R. and Subash Babu, A. (1992), “A New Approach to Process Diagnostics and Management in Manufacturing Systems”, Proceedings of the International Symposium on Robotics, Mechatronics, and Manufacturing Systems, Kobe, Japan, September.
50. Jagadeesh, R. and Subash Babu, A. (1992), “Process Control Using Multiple Measures ‑ A Simulation Approach”, Presented in the 24th ORSI Conference, Bangalore, India, December, (1991), and also abstracted in OPSEARCH, March‑April.
51. Jagadeesh, R. and Subash Babu, A. (1991), “The Effectiveness of Various Process Capability Measures ‑ An Analysis Through Case Study”, Proceedings of the 7th National Convention of Production Engineers, Hyderabad, India, August, pp 4.8.1- 4.8.9.

Serving in various Institutions:  

Membership of Professional Bodies:

1. Institution of Engineers (India)
2. Indian Society of Technical Education
3. Indian Institute of Materials Management
4. Association of Indian Management Scholars, and
5. Indian Association for Productivity, Quality, and Reliability
6. Indian Society for Training and Development

Organizing Conferences / Seminar: 6

Other Academic activity: Patent from Government of India, with provisional patent no 201841018072

Consultancy & Training Experience

National Awards

Guided the Best M.Tech. Thesis in Maintenance Engineering, 1987.

Honorary member -Research Panel 

1. Internal Quality Assurance Cell (IAQC), NIE, Mysore.
2. Assessment panel for promotion to next grade at CFTRI, Mysore
3. Selection committee for faculty selection at GSSS College of Engineering, Mysore.
4. Selection committee to assess Quality Improvement Projects at Rane Madras Ltd.
5. Selection committee – Administrative Training Institute, Mysore

On Editorial Board   (Since 2013)

1. The TQM Journal, UK
2. Journal of Management Science and Practice, USA
3. International Journal of Productivity and Performance Management
4. JResLit Journal of Business Administration and Management.

Peer Reviewer for

1. International Journal of Education and Training,
2. Journal of Quality Assurance in Education,
3. International Journal of Business Excellence, and
4. Journal of Management Development.

• Advisor (India Operations) for Emerald Publishers, UK.
• Founder Editor – SDM IMD Journal of Management
• Editor (Former) – I Managers’ Journal of Management